Elevators for administrative buildings have a number of indisputable advantages. In addition to the typical requirements for all types of elevator equipment, namely, a high level of safety, comfort and reliability, such lifting devices are characterized by a sufficient degree of durability. Moreover, this characteristic concerns not only the basic mechanisms and the entire structure of the elevator, but also the materials that trim the walls, ceiling and floor of the cabin. After all, in just one day, through such passenger lifts, a huge number of people pass, so the degree of abrasion of even the best quality cladding should be quite low.
In large corporations, holdings, every minute flow of passengers obliges this technique to always be in perfect working order. This is especially important for office buildings, as the profitability of the company directly depends on the comfort of moving customers and customers. In many administrative and office centers, large private enterprises set up unique designer cabin lifts, which become an element of a single corporate image.
Advantages of elevators for office buildings
Taking into account that the intensity of operation of elevators installed by specialists of our company in office centers, public and administrative buildings is quite high, strict requirements are imposed on him:
communication with the dispatcher;
Classification of elevators for office buildings
Unified classifications for elevators in administrative buildings and offices do not exist, but there are the main features:
The level of comfort for administrative buildings is most suitable for business class elevators.
By itself, the "business class" elevator will be able to successfully perform its functions for many years. The safety system of this elevator is designed to minimize the risk of death if the lift falls, for this the bottom of the body is equipped with special materials that soften the impact. Illumination in the elevator is also arranged in such a way that even with very heavy damages not leave passengers without light, and the alarm mechanism was able to remain intact even under the influence of high temperature and send a signal to the control room or emergency service.
By drive type
Electric elevators - installed in multi-storey administrative centers. A classic version of the hoist design: the models are equipped with traction ropes and a gearless motor that drives the winch into motion. Such elevators are characterized by high speed and are not limited in height.
All electric elevators have counterweights. Due to this, they are more economical in terms of energy consumption. Many modern models of electric elevators do not require an engine room located above or below the elevator shaft. In such elevators, the engine is located in the upper part of the shaft.
Advantages of electric elevators:
Lifting speed reaches from 1 to 2 meters per second;
provide a high lift height;
By the location of the engine room
above the mine;
under the shaft or on the side of it;
Without engine room.
Doors of mine and cabin
Door drive type
automatic (central and telescopic opening);
combined (cab doors - with automatic drive, and mine doors - with manual).
semiautomatic (doors open manually, but closed with automatic door closer);
By the speed of the car
electric drive type - from 0.71 m / s to 4 m / s.
According to the management system
group - to manage a group of elevators installed in one or more mines;
steam room - a kind of group management (used in large enterprises and other buildings of high storeys).
Collective - registers all the commands, but executes them in accordance with the program of work (passing stops on calls can be made only when the car moves down or when moving in both directions);
Single - for controlling one elevator;
Corresponding to a number of high requirements, noiseless and high-speed elevators for administrative and office buildings perfectly cope with the traffic intensity of large passenger flow. To do this, they must have good technological characteristics.
Lifting height with standard execution - up to 33 floors (higher - when made to order);
Lifting capacity of a passenger elevator - from 220 kg to 3 tons;
The number of people being moved is from 4 to 30;
Speed - from 0.3 m / s to 18 m / s (in high-speed elevators);
Dimensions of the cabin - from 1 m² to 25 m² (width - 0.9-1.5 m, height - 2.2-2.3 m, depth - 1-2.7 m);
The width of the doors is from 0.7 m to 1.6 m.
Mine for passenger elevator in administrative buildings
The elevator shaft is a structural spatial tunnel, where all the necessary systems for moving elevators are mounted. Lift shafts create conditions for unimpeded movement of passengers and goods between floors in a vertical plane.
The mine production process is complex and consists of two main stages: designing and directly manufacturing the mine and its components. For each concrete building object, elevator shafts are manufactured according to an individual design system. In this case, engineers take into account the load capacity of the cabin, as well as the purpose of its use. Most often, mines are reinforced concrete structures, they can be of various shapes and characteristics, depending on the location in which the elevator will be installed.
Do you want to buy an elevator for office and office buildings?
Company «Tries Group» understands that in administrative buildings sharper than in any other buildings, it is felt that time is money. Elevators play a leading role in ensuring a uniform, efficient, cost-effective and safe movement of people from the floor to the floor. The office staff and their visitors hope that when the button is pressed the elevator will arrive quickly. They want as soon as possible, but with comfort and safely get to the necessary floor. Than, our experts will help you choose a quality, durable and reliable elevator for your office. And the designers will choose the decor of the elevator so that it will attract its elegance, thus creating the impression of comfort and stability in your firm or institution! Similarly, our company's products are characterized by a high operational resource.
The company «Tries Group» is one of the largest companies specializing in the installation of elevators and lifts from the world's best manufacturers. The range of our services includes the supply, installation and maintenance of elevator equipment, all of them - with the highest standards of quality.
Our company works directly with manufacturers of lift equipment. In the company «Tries Group» an individual approach to each object, and our highly professional team will surprise their ideas and non-standard solutions to various tasks. Customers can be assured of the high quality of our work at all stages - from delivery to operation of elevators.